Home » Planetary concrete mixer » Supply vertical shaft mixer with strong mixing movement

Supply vertical shaft mixer with strong mixing movement

The discharging at the bottom of the vertical shaft mixer with strong mixing movement adopts a wide-opening door structure to realize rapid discharging and reduce mixing dead angles; discharging on the opposite side of the door is designed to effectively seal to prevent possible dust pollution during the mixing process.

Rated 4.7/5 based on 461 customer reviews
Share:
Content

Advantages of Supply vertical shaft mixer with strong mixing movement:
First of all, the material used in the lining of the vertical shaft mixer with strong mixing movement and subsequent tools can protect the material and avoid damaging the material during processing.
Secondly, the mixing motion of the powerful mixer for turning, overlapping, cutting and throwing of materials can mix materials of various specific gravity well.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.