Home » Planetary concrete mixer » Production of a new type of vertical shaft planetary mixer

Production of a new type of vertical shaft planetary mixer

The production of a new type of vertical shaft planetary mixer can efficiently and uniformly produce UHPC ultra-high performance concrete.

Rated 4.7/5 based on 517 customer reviews
Share:
Content

1. The transmission system consists of a motor, a coupling and a gearbox.
2. The support frame is composed of an upper support, a lower support, an inspection door, and an inlet (optional).
3. The mixing system of production of a new type of vertical shaft planetary mixer is composed of main mixing arm, side scraper arm, bottom scraper arm and main mixing blade, side scraper blade and bottom scraper blade.
4. The mixing drum is composed of a drum body, a drum bottom, and a high-strength wear-resistant liner.
5. Pneumatic unloading or hydraulic unloading can be used for unloading.
6. The water supply pipe of production of a new type of vertical shaft planetary mixer is installed on the lower part of the support frame by the water pipe, and a new type of spray head is installed on the water pipe, and the spray water is misty and uniform.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.