Home » Planetary concrete mixer » Premix weigh batching concrete mixer

Premix weigh batching concrete mixer

Premix weigh batching concrete mixer is professionally configured in the wallboard production line. It is an advanced wallboard production line mixing system with a high degree of automation and a good degree of matching of mixing equipment.

Rated 4.6/5 based on 324 customer reviews
Share:
  Content   2022-09-11

The production of premix weigh batching concrete mixer has a high level of demand for mixing. Although polystyrene particle lightweight wallboard has many advantages, polystyrene particles play a lot of roles, and the corresponding production difficulty also needs to be faced.
During the operation of the premix weigh batching concrete mixer, the equipment operation cost is low, and the staff can be employed without special training. The mechanized equipment operation saves more labor and improves the equipment operation and operation efficiency than the traditional wallboard mixer.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.