Home » Planetary concrete mixer » Concrete mixer with the planetary reducer

Concrete mixer with the planetary reducer

There is high wear-resistant steel liner in the concrete mixer with the planetary reducer bottom and inner wall, five pieces different purpose mixing arms could ensure refractory materials mix evenly and void sticking.

Rated 4.6/5 based on 240 customer reviews
Share:
Content

Maintenance of concrete mixer with the planetary reducer:
1. Clean the body and remove dirt and obstacles on the body.
2. Check the oil, circuit and control equipment at each lubrication point and fill the lubricant as required.
3. Before each shift, add water to the mixing drum for idling 1 to 2 minutes. At the same time, check the reliability of the clutch and brake device.
4. During the operation of the concrete mixer, it is necessary to check whether the noise of the motor, reducer, and transmission gear is normal and whether the temperature rise is too high.
5. After the end of each shift, the concrete mixer should be carefully cleaned.

concrete mixer philippines concrete mixer 0.5m3
concrete mixer philippines concrete mixer 0.5m3

We are able to supply concrete mixer with the planetary reducer, vconcrete mixer and planetary mixer, if you want more information, please feel free to email at sales@leadcrete.com.

500 litre pan planetary concrete mixer
500 litre pan planetary concrete mixer
Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.