Home » Planetary concrete mixer » Concrete mixer in dubai

Concrete mixer in dubai

The rotation of the Concrete mixer in dubai is obtained by superimposing the rotation of the revolution and the output agitation. This process belongs to the speed increasing mode.

Rated 5/5 based on 514 customer reviews
Share:
Content

The concrete mixer in dubai discharge door can be designed at the bottom of the mixer, which can be realized by cylinder or hydraulic pressure. It can also be designed for side opening and unloading. The number of discharge doors can reach three, so one mixer can be used for multiple production lines. .

Concrete mixer in dubai planetary operation matches the vertical disc structure design, which reduces the wear caused by the mixer stirring device and the stirring lining and material agitation, saving equipment use cost.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.