Home » Planetary concrete mixer » Automatic concrete pan mixer machine

Automatic concrete pan mixer machine

The inspection door of automatic concrete pan mixer machine is provided with an observation port, which can observe the condition of stirring the material during normal operation when the mixer is continuously powered.

Rated 4.5/5 based on 488 customer reviews
Share:
Content

The vertical axis of the automatic concrete pan mixer machine’s agitator arm raceway is more complex and dense, with almost no mixing dead ends, more fully stirred materials, greater power, less noise, and lower energy consumption.

1000l vertical planetary concrete mixer
1000l vertical planetary concrete mixer

The large opening of the inspection door of automatic concrete pan mixer machine is convenient for maintenance; the inspection door is provided with a special sealing strip, and the sealing is reliable; the inspection door has a safety switch, and the main unit is powered off during the switch to ensure safe operation.

500 litre pan planetary concrete mixer
500 litre pan planetary concrete mixer
Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.