Home » Planetary concrete mixer » 1m3 pan concrete mixer

1m3 pan concrete mixer

When we are doing 1m3 pan concrete mixers with cement weighing hoppers and high production projects, batching is usually done by batching towers.

Rated 4.9/5 based on 500 customer reviews
Share:
Content

When we are doing some small projects, we can use the hopper with metering for precise batching to achieve the ratio we want. We accept customer customization and can upgrade the machine according to customers’ ideas. Customers’ suggestions are our biggest motivation for improvement.
Previously, we had a customer who needed a 1m3 pan concrete mixer with a hopper. We also added a pump to the machine to mix and proportion the water electronically.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Planetary concrete mixer

Cost-effective planetary mixer for refractory material operation precautions
1. Check the content of Cost-effective planetary mixer for refractory material before operation
1. The power supply voltage and other adapter instruments have a reasonable rise and fall range, and the relevant installation should be guaranteed to be correct.
2. The fastening of each transmission system, drive system and other devices, the layout of the feeding system and gears are complete, and the safety measures are in place.
3. The wiring of relevant equipment is correct and will not cause safety hazards
2. Before the operation of Cost-effective planetary mixer for refractory material, conduct an idling test machine to confirm that there is no abnormality.
3. During the operation of the Cost-effective planetary mixer for refractory material, attention should be paid to abnormal conditions and excessive temperature rise of some components. If a problem occurs, it should be stopped for inspection and repaired until it is normal.
4. For Cost-effective planetary mixer for refractory material, the wearing parts should be replaced in time, and the equipment should be adjusted in time to return to normal state.
5. During the use of Cost-effective planetary mixer for refractory material, it is necessary to ensure that the operator can operate the equipment, and it is strictly forbidden to leave the work position during operation.
6. After each shift of Cost-effective planetary mixer for refractory material is completed, it must be cleaned and cleaned in time, the equipment should be lubricated, and the power supply should be cut off.