Squeeze pump for pumping foam concrete
2020-04-27 17:26:39
Squeeze pump for pumping foam concrete
Squeeze pump for pumping foam concrete designers and users are primarily interested in its ability to transport highly abrasive media. It has no valve, no seal, and the only part in contact with the medium is the inner chamber of the rubber hose, the rotor of the compression hose is completely independent of the medium. In addition, the hose pump has many unique features: no other pump than the hose pump has a better self-priming capacity, can produce almost perfect vacuum to absorb liquid; Conveying gas-containing liquid and foam liquid without gas resistance.
Conveying high viscosity, shear sensitive medium is also strong. Each fixed displacement and export pressure has nothing to do with the natural metering pump. Various advantages, so that soft KP pipe pump is more and more widely used in gold smelting, non-ferrous smelting, chemical, mining, food processing, brewing, ceramics, water treatment and other industries.
A high quality squeeze pump for pumping foam concrete life in 7-10 years, the biggest challenge is the foam concrete squeeze pump hose, it is the core of the hose pump, its life directly related to the use of the cost of the pump. It can be said that the design of the hose pump is around the maximization of hose life. Some people intuitively believe that the abrasive nature of the medium determines the life of the hose, which is a misconception.
Abrasive media does wear on the inner wall of the hose, so that the known thickness of the soft pipe wall becomes thinner, resulting in internal leakage or backflow and flow rate decline due to loose compression. The internal drainage further increases the wear rate of the inner wall. But high quality squeeze type foam concrete pump should have a hose compression adjustment device, in the use of the pump in the process of continuous adjustment to prevent the flow and flow down.
On the premise of not considering the compatibility between the conveying medium and the hose material, the service life of the hose is the same when conveying the strong abrasive medium. In fact, in addition to the type of hose itself and manufacturing quality, the first factor determining the hose life is the number of compression hose. The second factor is the manner and force of the compression hose and the resulting friction heat. In other words, the failure of the hose is due to the accumulation of compression times and the fatigue aging caused by friction heat.
The best way to maximize the hose life and extend the downtime interval is to reduce the number of compression hose, the use of the minimum damage to the hose compression method and precise compression strength.
We have many type squeeze pump for pumping foam concrete for you choose: