Mortar spraying machine for sale

 Looking for CE certification mortar spraying machine made in China from China mortar spraying machine manufacturers and suppliers, China manufacturing company, and China factory? Please feel free to contact Lead Equipment Co., Ltd., we are able to offer you low price and high quality good quality mortar spray machine. The following products are available. Welcome to buy cheap or wholesale products from us.

LMP50/40 Mortar Spraying Machine

LMP50/40 Mortar Spraying Machine is a kind of piston and ball controlling pump, and the conveying line, piston and cylinder is specially designed and processed, so this machine is workable for high-pressure grouting/spraying mortar (the mixture of sand: cement: water).

Remark: Electric motor type and diesel engine type are for optional. 

LMP40/10-H Mortar Plaster Pump

LMP40/10-H Mortar Plaster Pump  is designed as the combination of LH38-430 hose pump (peristaltic type), mini air compressor and frequency converter.
Note:The gearbox is heavy -duty Helical-bevel gear.
       *WEG or China domestic electric motor.

LH38ME Mortar Pump

LH38ME Mortar Pump is a plastering machine with peristaltic pump, provided of rotating internal rollers which it compressing and releasing a special hose internal on the pump; this movement allows the aspirating and pumping of the mortar.

LD-N2 Plastering Machine

LD-N2 Plastering Machine is a small-size, dry-mixed mortar transfer pump, which is suitable for materials less than 3mm, such as mortar that can be pumped, putty, paint, coating materials and things alike. LD-N2 Plastering Machine can be your spraying machine if it is equipped with our small-size air compressor, spray gun or relative accessories.

LD-N5 Wall Putty Spray Machine

LD-N5 Wall Putty Spray Machine is a small-size, dry-mixed mortar transfer pump, which is suitable for materials less than 5mm, such as ready-mixed dry mortar that can be pumped. LD-N5 can be your spraying machine if it is equipped with our small-size air compressor, spray gun or relative accessories.

LD-N1 Wall Putty Spray Machine

LD-N1 Plastering Machine is a small-size, dry-mixed mortar transfer pump, which is suitable for materials less than 2mm, such as mortar that can be pumped, putty, paint, coating materials and things alike. GD-N1 can be your spraying machine if it is equipped with our small-size air compressor, spray gun or relative accessories.

Mortar Spraying Machine Construction Method

1. Before starting, add fresh water into the hopper and regulate the speed to the middle-high speed in order to achieve the effect of wetting pipe, only a short running and then draining the water.

2. Putting the even material stirred into the hopper, and then locking pulp exit of main machine and the pipe & nozzle.

3. Before spraying, filling the pressure of air compressor to 8kg (matched air compressor 0.26-0.36m) and then connected to the nozzle.

4. After connecting to power, putting the gunpoint aiming the hopper, adjusting the air pressure and the speed until achieving the best state of fogging, shutting down the machine but non-stop wind.

5. After the accurate Debug, immediately move the nozzle and spray jets to the construction site work.

6. During the construction process, the pipe is filled with paints, not suitable for parking too long. If the power is failure, you should immediately dismantle the pipe to clean.

7. If filling pressure in the pipe, before dismantling & cleaning, you must put the cloth on it to protect your eyes, avoiding injury.

8. If starting the machine fails, first check whether the fire drills is broken or not and should replace it immediately.

9. Cleaning the body during the working or completion, making sure no wetting the electric drill & box, avoiding damage.

10. After completion of working, must clean up the hoppers, pipes, nozzles, and rotary joints so as to work tomorrow

11. If detecting the exit of coating is weak power after a long time to work, you have to replace the pressure pump.

12. If it suddenly appears without feeding material in the work, while motor is still working, it proves that the nozzle has been plugged. You should immediately stop working and clean the nozzle, and then continue to work.

13. The nozzle is damageable (including the pressure pump). The standard nozzle pore is 4mm. When the fogging of nozzle is not satisfactory, you should immediately replace the nozzle.

14. When manual operate, you should wear a safety helmet, glasses, and protective clothing.

Mortar Spraying Machine Construction Method Attention

1. The construction site must wear protective equipment (such as gloves, masks, goggles, safety helmet)

2. Water and electricity should be provided on site.  

3. The hand shall not be in the hopper when driving.

4. The construction site should be safe, covered and smooth.  

5. Machinery and circuit should avoid exposing in wet and open place.