High quality grout pump for transferring cement slurry
2022-05-09 13:17:01
High quality grout pump for transferring cement slurry
The high quality grout pump is the key equipment in the grouting construction process. The working performance and product quality of the grout pump play an important role in the safety and work efficiency of the grouting project. Therefore, it is very important to choose a high quality grout pump with good performance and quality assurance.
As a professional manufacturer of grout pump equipment in China, we have accumulated a wealth of experience. And our grout pump equipment has ISO and SGS certificates. Therefore, our products have quality assurance, and customers can rest assured to choose us. We also provide personalized customization services according to customers requirements.
LGP12/100PI-E is a piston-type grout pump, it is also driven by an electric engine. Its adjustable pressure is range from 0-100bar, its adjustable flow rate is range from 0-12L/min. And the power unit, oil tank capacity are same as LGP10-40-E grout pump.
Application of high quality grout pump for transferring cement slurry:
It is mainly used for injecting cement grout tubes, repairing damaged / dangerous structures, consolidating or weatherproofing walls, rocks, dams, and tunnels, pumping special products for anchoring and seals. It can also be used for teaching and research.
1. Grouting pressure, displacement is stepless adjustable;
2. Compact size, light weight and easy to maintain;
3. Low maintenance cost;
4. With counting function, it can record the reciprocating number of the injection pump;
5. Continuous output and small pulse;
6. Hydraulic driven and control.
In construction projects, the grout pump is an important grouting equipment. Develop a good habit of frequent maintenance of the grout pump, which can effectively extend the service life of grout pump, ensure the normal operation of the equipment during use process, reduce the failure rate, and improve work efficiency.
The maintenance of grout pump for transferring cement slurry should be carried out regularly, and the principle of prevention first.
1. The grout pump for transferring cement slurry should be cleaned after use to prevent the remaining cement slurry from solidifying and causing blockage.
2. Regularly replace the lubricating oil in the tank. After a period of use, lubricate the parts of the grout pump to prevent rust, and tighten the loose screws.
We have many standard models for your option, and we also could customize as per your requirement. Please tell us your requirements and we will provide you with the corresponding product parameters and quotations:
1. What rated flow and working pressure grout pump do you need?
2. How about the water and cement ratio, does any sand in?
3. Regarding the engine, do you want an electric engine or a diesel engine? If you need an electric engine, please let us know your local voltage.