Fly ash lightweight foam concrete making machine
2020-02-13 17:15:12
Fly ash lightweight foam concrete making machine
Fly ash lightweight foam concrete making machine is used to make
fly ash lightweight foam concrete blocks and panels, also it is widely used in cast-in-place works. Foam concrete can be directly pouring into the formworks to make houses, it is very convenient.
Taking into account the construction requirements of fly ash lightweight foam concrete and the actual situation on site, the foam fly ash concrete making machine is located within 300 meters of the construction site and covers an area of about 200 square meters. The device is placed on the ground as compacted soil on the roadbed, with a stable roadbed and satisfactory load carrying capacity.
1. Lightweight and high strength, reduce building load: dry density 320-1200kg/m3, which is 1/5-1/8 of ordinary concrete or block.
2. Good thermal insulation, sound insulation performance: its thermal conductivity of 0.06-0.16w / (m. k), 24cm thick wall insulation is 58dB, to meet the building exterior wall, household wall insulation, sound insulation requirements.
3. Good compression performance: compressive strength is greater than 0.5Mpa, the highest strength can reach more than 10.5Mpa.
4. Good earthquake resistance: Since the foam concrete block is a porous material, it has a low elastic modulus, so that it has good absorption and dispersion effects on the shock load, and the foam concrete block is light in weight, effectively reducing the construction, the smaller the building load, the stronger the seismic capacity.
5. Good water resistance: the water absorption of foam concrete material is less than 10%, which is obviously different from other wall self-insulation materials.