Apply seed with a hydroseeder machine

Hydro seeder machine for sale can be used for home, golf or commercial landscape.

Using seed hydroseeding machine as the following:

1. Prepare the area to be seeded by removing rocks and other debris from its surface. Rake the current soil or provide at least a 1-inch-deep layer of topsoil over the current soil, and rake it smooth. Raking soil helps seeds take root in it.

2. Add water to a lawn hydroseeding's tank until the water level reaches the machine's agitating blades. Close the hose end of the tank. Ensure the pump and agitators are turned off.

3. Turn on the hydroseeding mulch, and allow it to operate for several seconds. Turn the agitator knob to start the agitator. The agitator should operate at a speed that will mix the tank's contents slowly.

4. Place small batches of mulch, one batch at a time, into the tank. Add to the tank the seeds you want the hydroseeding equipment to apply. Put in the tank the nutrients you want the machine to apply. Allow the tank's contents to combine thoroughly.

5. Turn off the hydro mulcher's agitator, and turn on its spray nozzle. Pull or carry the machine, depending on its size, to the area you prepared for seeding. Stand at a location where you can spray the area's farthest corner.

6. Place the hydroseeding equipment for sales hose nozzle over your shoulder. Turn on the nozzle, and use long strokes to spray the hydroseeding mixture evenly, starting in the prepared area's farthest corner and working toward your position. Adjust the spray stream if necessary. Continue spraying until the prepared area's soil is completely and evenly covered with the hydroseeding mixture.

7. Water the hydroseeded area for about five minutes up to three times daily for two weeks. The area needs to be kept moist until seedlings appear.